Closed Cooling Tower Ammonia Evaporative Condenser With Stainless Steel Pipe

Ammonia Condenser Industrial Cooling Equipment NH3 Evaporative condenser R717 Evaporative Condenser R22 Evaporative:

2.1.1 Wind Cooling:

YZFL series evaporative condenser uses water and air as  Cooling agent.The cooling agent exchanges the heat with

High temperature gaseous refrigerant agent and hence the

refrigerant agent becomes liquid.inside it has a water

distribution system, condensing coils,wet deck ,dehydrator and

so on. Outside it has a water circulating pump , a propeller fan

on the top of condensing coil. The propeller fan strengthens

the flow of the air and causes negative pressure inside.

when the condenser runs,the cooling water is pumped and

then sprayed by water distribution system On the surface of

condensing coil equably to form a thin layer of water film.

2.1.2 Water Cooling:

The high –temperature steam of refrigerant agent enters from the top of condensing coil and then the cooled liquid refrigerant agent is discharged from the bottom of the condenseing coil .during this process,high temperature refrigerant agent exchanges the heat with the water and air outside the coil and increases the the effect of heat exchange with the help of wind .after aborbing the heat of refrigerant agent .some water turns into steam and is discharged by fan .meanwhile,the moisture in the

Air is collected by dehydrator to basin.and the ungasified cooling water flows into wet deck and its heat is taken away by the airflow .the cooled water converges in the basin to be used circularly by the pump.

In addition,there is a ball cock in the basin .when the water is consumed to a certain point the ball cock

Will automatically open to replenish the cooling water.

2.2 Evaporative Condensers Configuration and Technical Performance

The evaporative condensers main machine consists of shell, cooling coils, air discharge system, spray system, drift Eliminator and water basin etc.

• Drift Eliminator (standard): The main function of the Drift Eliminator is to recollect the vapor water after the cooling process for reuse in the following circulation. YANYE  exclusive high efficiency Drift Eliminator, by three-times changing air movement current, reduces the spray water drift rate to as small as 0.001%, making it ideal for application at fog sensitive areas.

• Water Collector(standard): The main function of water collector is to collect spray water. It consists of water basin, float bulb valve, water inlet, water drain outlet, foul drainage outlet, spray pump water inlet and filter net etc parts.