Payment & Shipping Terms:
|Shell:||Galvanized Steel Plate (S.Korea)||Water Basin:||304 SS|
|Power Supply:||380v/3p/50hz||Fan Blades:||IP55; Insulation: F; Alum-alloy Blades; Axial Flow|
|Wind Louvre:||Anti-corrosion; Sun Sheltering; Drift Elimination||Spray Nozzles:||ABS Basket Nozzles Of Umbrella Style|
Easy Installation Industrial Water Cooling Towers 1.10 Kw Spray Pump Power
|Nominal Flow Rate (m3/h)||120|
|Inlet/Outlet DN (mm)||50|
|Water Makeup/Bleed-off DN(mm)||25|
|Cooling Capacity (Kcal/h)||225000 Kcal/h|
|Unit Heat Rejection (KW)||261 kw|
|Unit Fan Motor (KW)||1.5 kw*2|
|Unit Airflow (m3/h)||16800*2|
|Spray Pump’s Delivery Lift (m)||10|
|Spray Pump Power (KW)||1.10 kw|
|Spray Water Flow Rate (m3/h)||22 m3/h|
|Main Water Pump’S Delivery Lift (m)||32|
|Main Water Pump’S Power (KW)||7.5|
|Main Water pump’s Flow Rate (m3/h)||50|
|Operation Work pressure||0.10--0.35 Mpa|
|Unit Dimension L × W × H (mm)||2500*1250*2350|
|Shipping Weight (kg)||1400|
Advantages for cooling towers
1) Closed loop
Preventing the impurities into the system to block the cooling tubes, soft water is adopted to avoid overheating caused by scaling to the water pipes.
2) Automatic temperature control
Automatic start/stop spraying system to achieve effective control on the temperature of cycled cooling water, the temperature of the cooling water can be controlled below 40 ℃. With this function, the water & energy cost is reduced to the lowest point with intelligent control to the number of working fans and start & stop of spray pump.
3) No need of water pool and cooling tower
Low cost, small space occupancy, easy installation and move with the welder.
4) Automatic digital display of temperature control
Energy efficient and user friendly.
5) Cooling system structure
Galvanized iron beam.
proportions, please consult your WELL representative.
1. Cooling Tower +Heat Exanger Combination
Closer approach to wet bulb temperature and reduce fouling, highly improve process efficiency
2. Air-Cooled Systems
10-20°C lower process temperatures ,less required space and lower energy consumption
3. Once –Through Systems
Reduces environmental impact ,saving up to 95% of the cooling water
4. Reduced installed Cost And Space Requirements
Effectively combines the function of a cooling tower and heat exchanger into one piece of equipment ,reduce required piping and system complexity.
Contact Person: Peter.Zeng