Payment & Shipping Terms:
|Power Supply:||380V/3P/50HZ||Spare Parts:||As Per Customer Actual Situation|
|Fan Blade:||Carbon Fiber Fan Blade/ Aluminum Alloy Blade||Water Eliminator:||Anti-corrosion Sun Sheltering Drift Elimination|
|Motor Grade:||IP55 Insulation: F||Electrical Brand Name:||Schneider|
|Cooling Coils:||316L SS Steel Plate||Shell:||Alum-zink Galvanized Steel Plate (S.Korea)|
|Spray Pump:||Cast Iron||Water Basin:||304 Ss Steel Plate/Alum-zink Galvanized Steel Plate (S.Korea)|
evaporative fluid cooler,
evapco closed circuit cooler
Closed fluid Cooler:
1) Automatic temperature control
Automatic start/stop spraying system to achieve effective control on the temperature of cycled cooling water, the temperature of the cooling water can be controlled below 40 ℃. With this function, the water & energy cost is reduced to the lowest point with intelligent control to the number of working fans and start & stop of spray pump.
2) No need of water pool and cooling tower
Low cost, small space occupancy, easy installation and move with the welder.
3) Automatic digital display of temperature control
Energy efficient and user friendly.
4) Cooling system structure
Galvanized iron beam.
5) High efficiency heat exchange
Four side air inlet louvers supply sufficient amount of wind blowing through cooling coils taking most of the heat away, which effect is strengthened via spray cooling water running through the cooling coils.
6) Small consumption of soft water
Filling the soft water once is enough for half-year operation without water loss.
Antifreeze is required in the winter season for areas subject to freeze temperature.
|Heat Reject :330 kw|
|Gas Filling Rate :49 kg/minute|
|Power of fan :1× 4.0 kw|
|Blowing rate: 1× 65000 m3/h|
|Spray Pump’s Delivery Lift :10 m|
|Spray Pump’s Power : 1.1 kw|
|Spray Water Flow Rate : 50 m3/h|
|Drift Loss : 0.001% m3/h|
|Operation Work Pressure: 0.10—0.35 Mpa|
|Inet/ Outnet: 1*DN 100mm/ 1*DN 100mm|
|DN100:Liquid outlet (Please specify adopted screw standards)|
|DN100:Air inlet (Please specify adopted screw standards)|
|Compensation water pipe: DN 25 mm|
|Discharge pipe: DN 50 mm|
|Overflow pipe: DN 80 mm|
|Shipping Weight: 2200 kg|
|Operating Weight:3400 kg|
Contact Person: Peter.Zeng